Comtech EF Data UT-4514F Especificaciones Pagina 100

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 162
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 99
UT-4500-A Series Upconverters Revision 1
Ethernet-based Remote Product Management MN-UT4500A
6–14
6.4.5.2.2 Admin | SNMP
The Administrator must use this page to manage the 45xxA SNMP (Simple Network
Management Protocol) settings.
Figure 6-5. Admin | SNMP page
Click [Refresh] to update the page with its latest operating parameters.
SNMP
Simple Network Management Operational Status: Use the drop-down list to select the
Simple Network Management operational setting as Enabled or Disabled.
The SNMP Read and Write Community String fields can be any combination of characters
and a length of 0 - 20 characters:
o The factory default for the Read Community String parameter is public.
o The factory default Write Community String is private.
Enable Authentication Trap: Use the drop-down list to select the Enable Authentication
Trap operational setting as Enabled or Disabled.
The Administrator can assign up to two SNMP Trap IP addresses and one SNMP Trap
Community String. The SNMP Trap Community String field can be any combination of
characters and a length of 0 - 20 characters:
o The factory default for the Trap Community String is comtech.
Trap Version: Use the drop-down list to select the SNMP Trap Version as SNMPv1 or
SNMPv2c.
See Sect. 6.3 SNMP INTERFACE for details pertaining to the remaining configuration parameters
available on this page,
Vista de pagina 99
1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 161 162

Comentarios a estos manuales

Sin comentarios