Comtech EF Data Vipersat CDM-570 Guía de usuario descargar pdf (Pagina 34)

Initial Configuration

2-10 Vipersat CDM-570/570L User Guide

Address must be defined also. Otherwise, this route is automatically cre-

ated and can be viewed with the Display command.

4. Enter S at the command prompt in figure 2-7 to save the settings to flash.

Set the Satellite Modem Configuration

1. Enter M from the Main Menu, then enter C from the Satellite Modem

menu to access the Configuration screen.

2. Enter T to access the Tx Configuration screen shown in figure 2-8. Set

the Tx parameters for Frequency, Data Rate, FEC, Code Rate, and

Modulation as specified by the network administrator.

Note: Only Turbo Product Coding is acceptable for FEC when the CDM-570/

570L

is running in Vipersat mode.

Figure 2-8

Tx Configuration screen

3. Enter R to access the Rx Configuration screen, and set the Rx parameters

as specified by the network administrator.

4. Save the settings to flash by entering S at the command prompt.

NOTE

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 191 192

Sin comentarios

Comtech EF Data Vipersat CDM-570 Guía de usuario Pagina 34