Comtech EF Data KST-2000B Especificaciones Pagina 58

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 184
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 57
CiM-25/600 IP Enabled M&C Rev. 3
SNMP Interface CD/CIM25600.IOM
40
3.5.1.14 CHANGE HTTP PORT
Using the !PT command, the Administrator can set the HTTP Port. The command
protocol is as follows:
Format: !PT <value>
Response: Command Successful
Where <value> can be any number in the range of 0 to 65535
Query Format: !PT ?
Response: !PT <value>
Notes:
1. The default port is set to 80.
2. Changes made via this command do not become active until the user has sent
a !EE command to commit the changes to EEPROM of the CiM-25.
3.5.1.15 CHANGE SNMP TRAP ADDRESS
Using the !TP command, the Administrator can set the SNMP Trap Addresses. The
command protocol is as follows:
Format: !TP <ip_address1> <ip_address2>
Response: Command Successful
Note:
An IP Address of 0.0.0.0 disables the trap
Query Format: !TP ?
Response: !TP <ip_address1> <ip_address2>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.
3.5.1.16 CHANGE SNMP TRAP COMMUNITY
Using the !TC command, the Administrator can set the SNMP Trap Community. The
command protocol is as follows:
Format: !TC <string>
Response: Command Successful
where <string> can be 0 - 20 characters
Query Format: !TC ?
Response: !TC <string>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.
Vista de pagina 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 183 184

Comentarios a estos manuales

Sin comentarios