Comtech EF Data Vipersat CDD-564L Especificaciones descargar pdf (Pagina 169)

CDD-562L/564 Demodulator with IP Module Revision 2

HTTP (Web Server) Interface MN/CDD564L.IOM

9–9

9.3.2.2 Admin | Mode

Use this page to define how the active demodulator is to operate in Vipersat or non-Vipersat

Working Mode. Once this unit’s role in the network is determined, this single point of

configuration simplifies deployment.

Figure 9-7. Admin | Mode page

Working Mode

Select an available working Mode, and then click [Submit] to execute the selection made on this

page.

Router – Small Network Mode: Small Network Mode supports up to 255 remotes, as allowed

using HDLC addressing. Select this mode to set the demodulator to be on independent IP subnets;

this mode requires adding static routes to pass traffic between them.

Router – Large Network Mode: This mode is similar to Small Network Mode, the exception

being that a maximum of 32,766 remotes are allowed on a single shared satellite outbound

carrier.

Router – Point-to-Point Mode: Select for use in a Point-to-Point SCPC link where there are

different IP subnets on either side of the link.

Router – Vipersat Mode

For details on configuration and use of Vipersat operations via the HTTP

Interface, consult adjunct Comtech EF Data publication MN/22137 – Vipersat

CDD-56X Series Satellite Network Demodulator Router User Guide

Managed Switch: Managed Switch Mode functions as a learning bridge with VLAN support.

Optional supported features include QoS, Header Comp, Payload Comp, and 3xDES. No routes

are required in this mode.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 253 254

Sin comentarios

Comtech EF Data Vipersat CDD-564L Especificaciones Pagina 169