Comtech EF Data CDM-710L Especificaciones descargar pdf (Pagina 51)

CRS-170A L-Band 1:1 Redundancy Switch MN/CRS170A.IOM

Modem and Switch Configuration Revision 13

4–3

4.2 Configure the CDM-625/As for 1:1 Redundancy

• CDM-625A Advanced Satellite Modem Installation and Operation Manual

(CEFD P/N MN-CDM625A)

• CDM-625 Advanced Satellite Modem Installation and Operation Manual

(CEFD P/N MN-CDM625)

The CDM-625/A Advanced Satellite Modem automatically detects if it is connected to a 1:1

redundancy system – the steps required to configure both modems are therefore minimal, with

some exceptions:

• If the CDM-625/A has the optional IP Packet

Processor installed and enabled, 1:1

Redundancy is controlled from the

CDM-625/A HTTP (Web Server) Interface

Redundancy page.

When both the traffic and backup

modems are equipped with the optional

IP Packet Processor and are connected to

the CRS-170A L-Band 1:1 Redundancy

Switch), there is no need to use the drop-

down menu here, as Packet Processor

Redundancy is enabled automatically.

If you wish to operate either modem outside of the redundant setup as a standalone unit,

use the drop-down menu to select Packet Processor Redundancy for that specific modem

as Disabled.

• If terrestrial data is not Ethernet and CnC will not be used, then no modem 1:1 redundancy

configuration is needed. Otherwise, if either applies, refer to the sections that follow.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 171 172

Sin comentarios

Comtech EF Data CDM-710L Especificaciones Pagina 51