Comtech EF Data CDM-710G Especificaciones descargar pdf (Pagina 56)

CDM-710G High-Speed Satellite Modem Revision 1

Ethernet Network Configurations MN-CDM710G

3–4

3.3.3 Hub-to-Hub with Standard Traffic using Switches

When connecting two or more “hub-sites” where there are multi-paths between each site, care must

be taken to ensure no network loops occur. Figure 3-2

depicts two hub-sites connected with two or

more modems where all the traffic being transmitted and received is on the same LAN/VLAN.

Figure 3-3

shows a simplified version of the Networking Loop. Since there is no router in the

network and all the traffic is destined to the same network, routing loops have been created.

As illustrated, two switches have been connected, each with two or more separate connections. This

is not how the Ethernet switches were designed to be used, and this configuration will cause a

network outage.

Figure 3-2. Networking Loop Example

Figure 3-3. Networking Loop Example (Simplified)

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 245 246

Sin comentarios

Comtech EF Data CDM-710G Especificaciones Pagina 56