Comtech EF Data CSAT-5060 Especificaciones descargar pdf (Pagina 45)

C-Band Transceiver Revision 1

Redundant Systems MN/CSAT5060.IOM

5–3

5.1.1.3 Rx Waveguide Switch interface, J2

The J2 interface connector (6-pin) provides the control and indicator signals between the

Rx Waveguide Switch and the RSU-5060.

Table 5-3. Rx Waveguide Switch Signal Description (Connector J2)

Pin Signal Name Type Description

A POS A CMD Output 24 VDC, 350 millisecond, Command Pulse

B CMD RETURN Passive Grounded internal to RSU-5060

C POS B CMD Output 24 VDC, 350 millisecond, Command Pulse

D POS A INDICATOR Input Shorted to Pin E = POSITION A

E IND COMMON Passive Grounded internal to RSU-5060

F POS B INDICATOR Input Shorted to Pin E = POSITION B

5.1.1.4 CSAT Unit B Interface, J3

The J3 interface connector (19-pin) provides the communications and control signals as

well as the +24 VDC power signal necessary between CSAT Unit B and the RSU-5060.

Table 5-4. CSAT B Signal Description (Connector J3)

Pin Signal Name Type Description

A RS485 RX+ Pass-thru RS-485 Rx+, From M&C to CSAT Unit B

B RS485 RX- Pass-thru RS-485 Rx-, From M&C to CSAT Unit B

C RS485 TX+ Pass-thru RS-485 Tx+, To M&C from CSAT Unit B

D RS485 TX- Pass-thru RS-485 Tx-, To M&C from CSAT Unit B

E n.c.

F REDUND_FLT* Output Fault Signal to CSAT B from RSU-5060

G n.c.

H AUXCOM_RD Output RS232 from RSU-5060 to CSAT B

J AUXCOM_TD Input RS232 from CSAT B to RSU-5060

K FAULT COMMON Output

L CSAT B FLT – NO Input Shorted to Pin K = O.K., open = Faulted

M n.c.

N B SELECT* Output Ground signal to CSAT B

P POSITION B* Output Ground = B Online, Open = B Offline

R B +24V Input +24VDC input power

S REDUNDANCY B* Output Ground signal to CSAT B

T GROUND Passive

U GROUND Passive

V n.c.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 223 224

Sin comentarios

Comtech EF Data CSAT-5060 Especificaciones Pagina 45