Comtech EF Data Vipersat SLM-5650A Guía de usuario Pagina 171

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 320
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 170
Chapter 6 - Out-of-Band Units 6-3
General
The percent of allocation applied to carriers when switched by VMS. The
default is 35% allowing for an allocation factor of 1.35.
Note: Currently this carrier guardband setting for OOB is separate from the
inband setting under the Vipersat Manager
and must be set to the same
value.
The following procedure demonstrates using the SNMP Manager using a
CDM-600L as an example.
1. From ViperView, right-click on the SNMP Manager to display the drop-
down menu shown in figure 6-2.
Figure 6-2
Declaring a CDM-600L
2. Select the Declare Modem command from the drop-down menu to display
the New SNMP Modem dialog shown in figure 6-3.
Figure 6-3
CDM-600L IP address dialog
3. From the Unit Type drop-down menu select the modem type to be declared.
In this example the CDM600L modem is selected.
4. Enter the assigned IP address in the IP Address dialog box shown in
figure 6-4.
NOTE
Vista de pagina 170
1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 319 320

Comentarios a estos manuales

Sin comentarios