Comtech EF Data CDM-710L Especificaciones descargar pdf (Pagina 87)

CDM-710 Broadcast Satellite Modem Revision 10

Front Panel Operation MN/CDM710.IOM

ASI2 Rx PLL Upper Limit Reached ASI Rx PLL Upper Limit Reached Slot 2

Rx DCM Unlocked Demod Digital Clock Manager unlocked

ASI1 Rx SERDES Parity Error ASI Rx SERDES parity error Slot 1

ASI1 Rx SERDES Unlock ASI Rx SERDES not locked Slot 1

ASI2 Rx SERDES Parity Error ASI Rx SERDES parity error Slot 2

ASI2 Rx SERDES Unlock ASI Rx SERDES not locked Slot 2

HSSI1 Rx Buffer Underflow HSSI Rx buffer has underrun Slot 1

HSSI1 Rx Buffer Overflow HSSI Rx buffer has overflowed Slot 1

HSSI2 Rx Buffer Underflow HSSI Rx buffer has underrun Slot 2

HSSI2 Rx Buffer Overflow HSSI Rx buffer has overflowed Slot 2

SERDES Par Framer -> Intf1 SERDES parity error detected on framer FPGA interface 1

SERDES Par Framer ->Intf2 SERDES parity error detected on framer FPGA interface 2

Rx Clock Source Interface 1 Rx Clock Source fault Interface 1

Rx Clock Source Interface 2 Rx Clock Source fault Interface 2

If Stored Events: ÆClear-All is selected:

Clear All Stored Events

No Yes (E)

When In Local mode: Using the ◄ ► arrow keys, select No to retain, or Yes to clear the buffer

of all stored events. The User should then press

ENTER.

Note: When the unit is in Remote mode, and the User attempts to use this menu (i.e., by using

the ◄ ► arrow keys), the following message is displayed:

THIS UNIT IS CURRENTLY

IN REMOTE MODE!!

5.3.3 (SELECT:) Test

Test:

Mode TestPatterns (E)

Test selections for the Tx carrier and Patterns are selected in this menu. Select Mode or

TestPatterns using the ◄ ► arrow keys. The User should then press

ENTER.

5–47

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 251 252

Sin comentarios

Comtech EF Data CDM-710L Especificaciones Pagina 87