Comtech EF Data CDM-710L Especificaciones Pagina 71

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 252
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 70
CDM-710 Broadcast Satellite Modem Revision 10
Front Panel Operation MN/CDM710.IOM
5.3.1.6 (CONFIG:) Intfc2 (CDI-70 Gigabit Ethernet Interface Only)
This menu branch shows what is available if Interface 2 (the Interface in Slot 2) is populated with
the CDI-70 Gigabit Ethernet Interface card. The menus and submenus depicted in this section are
dependent on this installed interface.
Intfc2 Gigabit Ethernet:
Ingress Egress Man Stats
Note: This documentation section assumes the interface is installed in Slot 2.
For this discussion:
• Ingress refers to IP packets received from the LAN
• Egress refers to IP packets transmitted to the LAN
• Transmit refers to MPEG packets transmitted to the WAN
• Receive refers to MPEG packets received from the WAN
(CONFIG:) Intfc2 Gigabit Ethernet: Æ Ingress
Intfc2 Gigabit Ingress:
Ena/Dis FEC Str (E)
Select Ena/Dis, FEC, or Str using the ◄ ► arrow keys. The User should then press
ENTER.
If Intfc2 Gigabit Ingress: Æ Ena/Dis is selected:
Intfc2 Ingress Enable:
Enable Disable
Select Enable or Disable using the ◄ ► arrow keys. Select Enable for transmission of the ingress
(received from LAN) MPEG-2 transmission stream. Select Disable to turn off the MPEG-2
transmission to the WAN. The User should then press
ENTER.
If Intfc2 Gigabit Ingress: Æ FEC is selected:
Intfc2 Ingress FEC
Enable Disable
Select Enable or Disable using the ◄ ► arrow keys. The User should then press
ENTER.
Select Enable for the GbEI to perform SMPTE 2022 / Pro-MPEG COP3 error recovery. Select
Disable to bypass the SMPTE 2022 / Pro-MPEG COP3 function.
5–31
Vista de pagina 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 251 252

Comentarios a estos manuales

Sin comentarios