Comtech EF Data KPA-040 Especificaciones Pagina 114
- Pagina / 128
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
KPA Ku-Band Indoor Solid-State Power Amplifier Revision 1
Appendix C MN/KPA.IOM
C–18
C.7.1 Old Utility Commands
Time Set Time:
Confirmation:
Retrieve Time:
Confirmation:
<DEV/TIM_hh:mm:ss'cr'
>DEV/TIM_hh:mm:ss 'cr''lf']
<DEV/TIM_'cr'
>DEV/TIM_hh:mm:ss 'cr''lf']
Where: hh = Hour
mm = Minutes
ss = Seconds
Note: 24-hour military is used.
Date Set Date:
Confirmation:
<DEV/DAT_mm/dd/yy'cr'
>DEV/DAT_mm/dd/yy/'cr''lf']
Where: mm = Month dd = Day yy = Year
Physical Address Set Physical Address :
Confirmation:
Retrieve Physical
Address:
Confirmation:
<DEV/SPA_xxx'cr'
>DEV/SPA_xxx'cr''lf']
<DEV/SPA_'cr'
>DEV/SPA_xxx'cr''lf']
Where: xxx = 1 to 255
The default physical address is 1.
Baud Rate Set Baud Rate:
Confirmation:
Retrieve Baud Rate:
Confirmation:
<DEV/SBR_xxxx'cr'
>DEV/SBR_xxxx'cr''lf']
<DEV/SBR_xxxx'cr'
>DEV/SBR_xxxx'cr''lf']
Where: xxxx = 300, 1200, 2400, 4800, or 9600
The default baud rate is 9600.
Parity Bit Set Parity Bit:
Confirmation:
Retrieve Parity Bit:
Confirmation:
<DEV/SPB_xxxx'cr'
>DEV/SPB_xxxx'cr''lf']
DEV/SPB_'cr'
DEV/SPB_xxxx'cr''lf']
Where: xxxx = Odd or Even
The default parity is Even.
LCD Contrast Set Contrast:
Confirmation:
Retrieve Contrast:
Confirmation:
<DEV/CON_xx'cr'
>DEV/CON_xx'cr''lf']
<DEV/CON_'cr'
>DEV/CON_xx'cr''lf']
Where: xx = 0 to 30
The default is contrast 15.
LCD Brightness Set Brightness:
Confirmation:
Retrieve Brightness:
Confirmation:
<DEV/LCD_xx'cr'
>DEV/LCD_xx'cr''lf']
<DEV/LCD_'cr'
>DEV/LCD_xx'cr''lf']
Where xx = 0 to 30
The default is contrast 15.
Lamp Test
KPA-020IN
Test Lamps:
Confirmation:
Lamp Test Status:
Confirmation:
<DEV/LAM_xxx'cr'
>DEV/LAM_xxx'cr''lf']
<DEV/LAM_'cr'
>DEV/LAM_xxx'cr''lf']
Where: xxx = On or Off
- Errata A 3
- Part Number MN/KPA.IOM 5
- Revision 1 5
- October 29, 2010 5
- Table of Contents 7
- Figures 11
- PREFACE 13
- Conventions and References 14
- Metric Conversion 14
- Trademarks 14
- Cautions and Warnings 14
- IMPORTANT 15
- Warranty Policy 16
- Limitations of Warranty 16
- Exclusive Remedies 17
- Customer Support 18
- Online Customer Support 18
- Chapter 1. INTRODUCTION 19
- 1.2 Functional Description 20
- Introduction MN/KPA.IOM 21
- 1.3 KPA Specifications 23
- 1.3.5 Dimensional Envelopes 27
- Chapter 2. INSTALLATION 29
- 2.2 Rack Mounting the KPA 30
- Installation MN/KPA.IOM 31
- Chapter 3. CONNECTORS AND 33
- PINOUTS 33
- 3.2 RF Connections 35
- 3.2.2 J2 RF OUT Connector 35
- 3.3 Utility Connections 36
- 3.3.7 J6 COM 1 Connector 39
- Chapter 4. FLASH UPGRADING 41
- Flash Upgrading MN/KPA.IOM 42
- Chapter 5. FRONT PANEL 45
- OPERATION 45
- 5.1.1 Startup Checklist 46
- 5.1.2 LED Indicators 46
- 5.1.3 Keypad 47
- 5.1.4 Front Panel Display 48
- 5.2 Opening Screen 48
- 5.3 SELECT: (Main) Menu 49
- ◄ ► arrows keys, then press 50
- 5.3.1.2 CONFIG: Amp 54
- 5.3.2 SELECT: Monitor 57
- 5.3.2.1 MONITOR: Faults 58
- 5.3.2.2 MONITOR: Stored 58
- 5.3.3.1 UTILITY: Date/Time 60
- 5.3.3.3 UTILITY: PowerMon 60
- 5.3.3.4 UTILITY: Firmware 61
- 5.3.3.5 UTILITY: RefOsc 61
- 5.3.4 SELECT: Front Panel 62
- Chapter 6. KPA ETHERNET 63
- MANAGEMENT 63
- 6.4 Telnet Interface 65
- 6.5.3 Web Server Menu Tree 67
- 6.5.4.1 Home pages 68
- 6.5.4.2 Admin pages 70
- 6.5.4.2.2 Admin 72
- Amplifier 73
- Alarm Mask 74
- [Change Offsets] as 75
- Redundancy Mode 77
- 6.5.4.4 Status pages 78
- Appendix A. MAINTENANCE AND 81
- TROUBLESHOOTING 81
- A.2 Maintenance Testing 82
- A.2.1 Test Point Samples 82
- A.3 Troubleshooting 82
- A.3.1 Troubleshooting Guide 83
- Appendix A MN/KPA.IOM 84
- Appendix B. KPA REDUNDANT 87
- OPERATIONS 87
- Waveguide 88
- Appendix B MN/KPA.IOM 89
- 0.00 dBm 95
- -1.75 dB 95
- +1.75 dB 96
- Appendix C. REMOTE CONTROL 97
- C.3 EIA-232 98
- C.4 Basic Protocol 98
- C.5 Packet Structure 99
- C.5.1 Start of Packet 99
- C.5.2 Target Address 100
- C.5.3 Address Delimiter 100
- C.5.4 Instruction Code 100
- C.5.7 End of Packet 102
- Appendix C MN/KPA.IOM 103
- C–7 103
- C–8 104
- C–9 105
- C–10 106
- C–11 107
- C–12 108
- C–13 109
- C–14 110
- C–15 111
- C–16 112
- C–17 113
- C.7.1 Old Utility Commands 114
- C–19 115
- C–20 116
- C–21 117
- C.7.4 Old Status Commands 118
- C–23 119
- C–24 120
- C–25 121
- C–26 122
- C–27 123
- C.7.5 Old Stored Alarms 124
- C.7.6 Error Processing 125
- C.7.7 Configuration Errors 125
- C.7.8 Time-Outs 125
- C–30 126
- METRIC CONVERSIONS 127
- Units of Length 127
- Temperature Conversions 127
- Units of Weight 127
- 480 • 333 • 2200 PHONE 128
- • 333 • 2161 FAX 128
Relacionado con productos y manuales para Amplificadores de audio Comtech EF Data KPA-040
(218 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.028 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales