Comtech EF Data CIM-550 Especificaciones Pagina 447

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 460
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 446
CiM-550 IP Enabled Satellite Modem Rev. 2
CiM IP Module Checkout & Fault Isolation CD/CIM550.IOM
421
14.2.3 TRANSMIT AND RECEIVE IF CONFIGURATION
Step Procedure
1
Configure the transmit and receive IF parameters on CiM 1 and CiM 2 via the front panel.
Note: The IF parameters can also be set via console menu, Telnet, web interface and SNMP -
but for this exercise, it is recommended that the front panel be used.
2
Set the TxPower to minimum level.
3
Before proceeding to next step, make sure that each CiM is locked to the other CiM.
14.2.4 BASIC IP CONFIGURATION
Step Procedure
1
Launch the terminal emulation program - such as HyperTerminal on Microsoft Windows.
2
Select the appropriate COM port (to which the DB-9 end of the console cable is
connected) and configure it for:
38,400 bps
8 data bits
no parity
1 stop bit
no hardware flow control
3
Press return and to bring up the Main menu.
Vista de pagina 446
1 2 ... 442 443 444 445 446 447 448 449 450 451 452 ... 459 460

Comentarios a estos manuales

Sin comentarios