Comtech-ef-data MIDAS Version 4.X Basic Configuration Manual de usuario descargar pdf (Pagina 76)

MIDAS 4.2 Basic Configuration, Rev. 1

2–42 Setup and Operation

Mode

This allows the operator to select the Mode for the modem, either Internal or

External, by selecting the appropriate button.

• When the node is set to Internal mode, there can be only one channel; the

Add button will be disabled, and no additional channels can be added.

• When the node is set to External mode, up to 30 channels can be added to

a node, and they will all be displayed on the Channels list portion of the

Node window.

When a Node is enabled, its mode cannot be changed; i.e., from Internal

to External.

This drop-down box is used to select the Control Channel that the node will be

assigned to. Each node is assigned to one Control Channel, and many nodes

can be assigned to one Control Channel.

The current system requires that the Control Channel be set to 1.

This is a list of the Channels associated with the currently selected node, and is

located on the lower portion of the Node window. This list displays the

following properties:

• Ch ID – displays the Channel ID number

• Enable – displays the Enabled/Disabled status of the Channels

• Type – displays the Channel Type (Data or Video)

• Ch Status – displays the Active/Inactive status of the Channels

• Description – displays the Channel description, if any, as entered by the

operator in the Channel Details window

This allows the operator to select the Sorting Order method that will be used,

either Ascending (1, 2, 3)or Descending (3, 2, 1), to display the Channels in

the Channels List, by selecting the appropriate button.

A vertical scroll-bar will appear automatically when the number of

channels exceeds the viewing capacity of the box.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 163 164

Sin comentarios

Comtech-ef-data MIDAS Version 4.X Basic Configuration Manual de usuario Pagina 76