Comtech EF Data LPOD Especificaciones descargar pdf (Pagina 41)

LPODnet M&C Netbook Accessory Revision 3

Ethernet-Based M&C using the LPODnet MN-LPODNET

3–11

1. Each unit on the network must have its own unique IP address before it is

connected to an existing network. The IP address may need to be changed

to something other than the factory default setting by using the command

IPA=xxx.xxx.xxx.xxx.yy, where: xxx.xxx.xxx.xxx is a valid IP address on the

network where the unit will be installed, and yy is the range (typically, yy =

24).

2. Changing the IPA value requires you to cycle power on the unit, and then

start a new Telnet session using the new IP address.

3. See Chapter 5. SERIAL-BASED REMOTE PRODUCT MANAGEMENT in the

pertinent SSPA manual (CEFD P/N MN-LPOD or MN-SPODPSX) for more

information on the LRS and IPA commands.

3.6.2 Accessing the SSPA Web Server Interface

1. From the LPODnet, open a Web browser and type http://192.168.1.4 (the default IP

address for the SSPA) into the Address area of the browser:

2. The Login window appears and you are prompted to type a User Name and Password:

Default User Name – comtech

Default Password – comtech

Type the User Name and Password, then click [OK].

3. Once the valid IP address and login

information has been entered, the

SSPA Web Server (HTTP) Interface

“Splash” page is displayed:

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Sin comentarios

Comtech EF Data LPOD Especificaciones Pagina 41