Comtech EF Data CDM-840 Especificaciones Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 110
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
CDM-840 Remote Router Revision 0
Introduction MN-CDM840
1–2
Data Interfaces: (1X) 10/100/1000 BaseT Ethernet for Gigabit Ethernet traffic) port and
(1X) 10/100 BaseT Ethernet port (for management)
Firmware – Flash Upgrading
(FUTURE) 1:1 redundancy switch compatibility
The CDM-840 is compact – 1RU high X 16.18” deep – and consumes 20 watts at 110V
input (maximum, without BUC supply) or 245 watts (maximum, with BUC supply).
1.2 Functional Description
Figure 1-2. Advanced VSAT Series Network Topology Example
Figure 1-2 illustrates the CDM-840 Remote Router as de
ployed in a typical satellite-based
communications network – in this example, a hub-and-spoke IP Network.
The CDM-840 utilizes a high performance processor and a real-time operating system (RTOS)
combined with multiple Field Programmable Gate Arrays (FPGAs) for optimal performance. All
non-volatile memory is provided onboard. Field upgrades are easily uploaded via satellite or the
Ethernet port; software-based options are added to the unit via FAST (Fully Accessible System
Topology) upgrade.
The CDM-840 runs on an embedded operating system and does not have moving parts for media
storage. This design provides carrier class reliability and high speed, purpose-driven processing.
The unit can be managed through multiple interfaces providing options for both in-band and out-
of-band monitor and control:
SNMP MIB II and Private MIB
HTTP Web-based Management
EIA-232 serial remote control
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 109 110

Comentarios a estos manuales

Sin comentarios